To Trigger the Oscilloscope EN ⚫ I2C Trigger (Option) 8.6.1 Edge Trigger The edge trigger type identifies the trigger by searching for the specified edge (Rising, Falling, Either) and voltage level on the waveform. Figure 8.3 Rising/Falling Click on [Trig Menu] in the button area to open the trigger menu. 1. Type: Click on the Type menu label, select "Edge ", and set the trigger settings. After selecting the trigger type, the current trigger setting information (including trigger type, trigger signal source, and trigger level) will be displayed at the top of the screen, which changes with the trigger setting. 2. Source:
Click on the Source menu tab to select sources such as CH1, CH2, CH3, CH4, and EXT. DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 62