Administrator Information > Connecting to the Network > Before Making Network Connection Connecting to the Network You can connect to the network with a static IP address by using the installer on the software disc. Before Making Network Connection To connect to the network, check the connection method and setting information for connection in advance. Gathering Information on the Connection Setting Prepare the necessary setting information to connect. Check the following information in advance. IP Address Assignment These are the following types of IP address assignment. Static IP address: Assign the predetermined IP address to the scanner (host) manually.
187 Divisions Items Note Network connection information ❏ IP address ❏ Subnet mask ❏ Default gateway Decide the IP address to assign to the scanner. When you assign the IP address statically, all values are required. When you assign the IP address dynamically using the DHCP function, this information is not required because it is set automatically. Wi-Fi connection information ❏ SSID ❏ Password These are the SSID (network name) and the password of the access point that the scanner connects to. If MAC address filtering has been set, register the MAC address of the scanner in advance to register the scanner. See the following for the supported standards.
“Network Specifci ations” on page 229 DNS server information ❏ IP address for primary DNS ❏ IP address for secondary DNS These are required when specifying DNS servers. The secondary DNS is set when the system has a redundant configuration and there is a secondary DNS server. If you are in a small organization and do not set the DNS server, set the IP address of the router. Proxy server information ❏ Proxy server name Set this when your network environment uses the proxy server to access the internet from the intranet, and you use the function that the scanner directly accesses to the internet. The scanner connects directly to the Internet to update the frimware.
Port number information ❏ Port number to release Check the port number used by the scanner and computer, then release the port that is blocked by a friewall, if necessary. See the following for the port number used by the scanner. “Using Port for the Scanner” on page 230