Administrator Information > Connecting to the Network > Connecting to the Network Using a Static IP Add … The information to connect to the network (subnet mask, default gateway, DNS server and so on) need to be set manually. The IP address does not change even when the device is turned off, so this is useful when you want to manage devices with an environment where you cannot change the IP address or you want to manage devices using the IP address. We recommend settings to the scanner, server, etc. that many computers access. Also, when using security features such as IPsec / IP filtering, assign a fixed IP address so that the IP address does not change.
Automatic assignment by using DHCP function (dynamic IP address): Assign the IP address automatically to the scanner (host) by using the DHCP function of the DHCP server or router. The information to connect to the network (subnet mask, default gateway, DNS server and so on) is set automatically, so you can easily connect the device to the network. If the device or the router is turned off, or depending on the DHCP server settings, IP address may change when re-connecting. We recommend managing devices other than the IP address and communicating with protocols that can follow the IP address. Note:
When you use the IP address reservation function of the DHCP, you can assign the same IP address to the devices at any time. DNS Server and Proxy Server The DNS server has a host name, domain name of the email address, etc. in association with the IP address information. Communication is impossible if the other party is described by host name, domain name, etc. when the computer or the scanner performs IP communication. Queries the DNS server for that information and gets the IP address of the other party. This process is called name resolution. Therefore, the devices such as computers and scanners can communicate using the IP address.
Name resolution is necessary for the scanner to communicate using the email function or Internet connection function. When you use those functions, make the DNS server settings. When you assign the scanner's IP address by using the DHCP function of the DHCP server or router, it is automatically set. The proxy server is placed at the gateway between the network and the Internet, and it communicates to the computer, scanner, and Internet (opposite server) on behalf of each of them. The opposite server communicates only to the proxy server. Therefore, scanner information such as the IP address and port number cannot be read and increased security is expected.
When you connect to the Internet via a proxy server, configure the proxy server on the scanner. Connecting to the Network Using a Static IP Address Selecting a static IP address using the software installer. 188