EPSON — Receiving Email Notifications When Events Occur

Administrator Information > Monitoring a Remote Scanner > Receiving Email Notifications When Events Occur ❏ Hardware Status Check the status of each function of the scanner. Receiving Email Notifications When Events Occur About Email Notifications This is the notification function that, when events such as scanning stop and scanner error occur, send the email to the specified address. You can register up to five destinations and set the notification settings for each destination. To use this function, you need to set up the mail server before setting up notifications. Configuring an Email Server Check below before setting up. ❏ The scanner is connected to a network.

❏ The computer's email server information. 1. Access Web Config and select the Network tab > Email Server > Basic . 2. Enter a value for each item. 3. Select OK . The settings you have selected are displayed. Mail Server Setting Items 191 Items Settings and Explanation Authentication Method Specify the authentication method for the scanner to access the mail server. Off Authentication is disabled when communicating with a mail server. SMTP AUTH Requires that a mail server supports SMTP Authentication. POP before SMTP Confgi ure the POP3 server when selecting this method.

Authenticated Account If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the authenticated account name between 0 and 255 characters in ASCII (0x20-0x7E). Authenticated Password If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the authenticated password between 0 and 20 characters in ASCII (0x20-0x7E). Sender's Email Address Enter the sender's email address. Enter between 0 and 255 characters in ASCII (0x20-0x7E) except for : ( ) [ ] ; ¥. A period "." cannot be the frist character. SMTP Server Address Enter between 0 and 255 characters using A-Z a-z 0-9 . - . You can use IPv4 or FQDN format.