EPSON — Controlling Using Protocols

Administrator Information > Advanced Security Settings > Controlling Using Protocols Security Feature Settings When setting IPsec/IP filtering or IEEE802.1X, it is recommended that you access Web Config using SSL/TLS to communicate settings information in order to reduce security risks such as tampering or interception. Make sure you configure the administrator password before setting IPsec/IP filtering or IEEE802.1X. Controlling Using Protocols You can scan using a variety of pathways and protocols. Also, you can use network scanning from an unspecified number of network computers.

You can lower unintended security risks by restricting scanning from specific pathways or by controlling the available functions. Controlling protocols Configure the protocol settings supported by the scanner. 1. Access Web Config and then select the Network Security tab > Protocol . 2. Configure each item. 3. Click Next . 4. Click OK . The settings are applied to the scanner. Related Information & “Running Web Config on a Web Browser” on page 26 Protocols you can Enable or Disable 197 Protocol Description Bonjour Settings You can specify whether to use Bonjour. Bonjour is used to search for devices, scan, and so on. SLP Settings You can enable or disable the SLP function.

SLP is used for push scanning and network searching in EpsonNet Confgi . WSD Settings You can enable or disable the WSD function. When this is enabled, you can add WSD devices, and scan from the WSD port. LLTD Settings You can enable or disable the LLTD function. When this is enabled, it is displayed on the Windows network map. LLMNR Settings You can enable or disable the LLMNR function. When this is enabled, you can use name resolution without NetBIOS even if you cannot use DNS. SNMPv1/v2c Settings You can specify whether or not to enable SNMPv1/v2c. This is used to set up devices, monitoring, and so on.