EPSON — Controlling Using Protocols

Administrator Information > Advanced Security Settings > Controlling Using Protocols Protocol Setting Items Bonjour Settings SLP Settings WSD Settings LLTD Settings LLMNR Settings 198 Protocol Description SNMPv3 Settings You can specify whether or not to enable SNMPv3. This is used to set up encrypted devices, monitoring, etc. Items Setting value and Description Use Bonjour Select this to search for or use devices through Bonjour. Bonjour Name Displays the Bonjour name. Bonjour Service Name Displays the Bonjour service name. Location Displays the Bonjour location name. Wide-Area Bonjour Set whether to use Wide-Area Bonjour.

Items Setting value and Description Enable SLP Select this to enable the SLP function. This is used such as network searching in EpsonNet Confgi . Items Setting value and Description Enable WSD Select this to enable adding devices using WSD and scan from the WSD port. Scanning Timeout (sec) Enter the communication timeout value for WSD scanning between 3 to 3,600 seconds. Device Name Displays the WSD device name. Location Displays the WSD location name. Items Setting value and Description Enable LLTD Select this to enable LLTD. The scanner is displayed in the Windows network map. Device Name Displays the LLTD device name.