Administrator Information > Advanced Security Settings > Controlling Using Protocols SNMPv1/v2c Settings SNMPv3 Settings 199 Items Setting value and Description Enable LLMNR Select this to enable LLMNR. You can use name resolution without NetBIOS even if you cannot use DNS. Items Setting value and Description Enable SNMPv1/v2c Select to enable SNMPv1/v2c. Access Authority Set the access authority when SNMPv1/v2c is enabled. Se- lect Read Only or Read/Write. Community Name (Read Only) Enter 0 to 32 ASCII (0x20 to 0x7E) characters. Community Name (Read/Write) Enter 0 to 32 ASCII (0x20 to 0x7E) characters.
Items Setting value and Description Enable SNMPv3 SNMPv3 is enabled when the box is checked. User Name Enter between 1 and 32 characters using 1 byte characters. Authentication Settings Algorithm Select an algorithm for an authentication for SNMPv3. Password Enter the password for an authentication for SNMPv3. Enter between 8 and 32 characters in ASCII (0x20-0x7E). If you do not specify this, leave it blank. Confrim Password Enter the password you confgi ured for confrimation. Encryption Settings Algorithm Select an algorithm for an encryption for SNMPv3. Password Enter the password for an encryption for SNMPv3. Enter between 8 and 32 characters in ASCII (0x20-0x7E).
If you do not specify this, leave it blank. Confrim Password Enter the password you confgi ured for confrimation. Context Name Enter within 32 characters or less in Unicode (UTF-8). If you do not specify this, leave it blank. The number of characters that can be entered varies depending on the language.