DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Length of Operand (16-bit or 32-bit instruction) The length of operand can be divided into two groups: 16-bit and 32-bit for processing data of different length. A prefix ”D” indicates 32-bit instructions. 16-bit MOV instruction X0 When X0 = ON, K10 will be sent to D10. 32-bit DMOV instruction When X1 = ON, the content in (D11, D10) will be X1 sent to (D21, D20).
Explanation of the format of application instruction 1 A PI 10 6 { 8 API number for instruction The core mnemonic code of instruction A prefix “D” indicates a 32 bit instruction A suffix “P“ in this box indicates a pulse instruction Operand format of the instruction Function of the instruction Applicable PLC models for this instruction A symbol “*” is the device can use the index register. For example, device D of operand S1 supports index E and F. A symbol “ * ” is given to device which can be used for this operand 3-16 Source: if there are more than one source is required, it will be indicated as S , S ...etc. 1 2. Destination:
if there are more than one destination is required, it will be indicated as D , 1 D ...etc. 2. If the operand can only be constant K/H or a register, it will be represented as m, m , m , n, n , 1 2 1 n …etc. 2 MOV K10 D10 DMOV D10 D20 2 3 4 5 M nemonic Operands Function C ontrollers ES2/EX2SS2 SA2 SX2 D C MP P S 1 S 2 D C ompa re C ontrollers ES2/EX2 SS2 SA2 SX2 Type OP B it Device s Word D evices Program Ste ps X Y M S K H KnX KnY KnM KnS T C D E F CM P, C MPP: 7 steps DC MP, DC MPP: 13steps 7 S 1 * * * * * * * * * * * S 2 * * * * * * * * * * * D * * * PULSE 16 -b it 32 -b it E S2/E X2 S S2 S A2 S X2 E S2/E X2 S S2 S A2 S X2 E S2/E X2 S S2 S A2 S X2