Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Program example 1: When X0 = ON, the program will skip from address 0 to N (Pointer P1) automatically and keep on executing. Instructions between address 0 and N will be skipped.. When X0 = OFF, program flow will proceed with the row immediately after the CJ instruction. X0 P*** (CJ instruction) 0 P1 X1 Y1 X2 N P1 Y2 Program example 2: 1. The instruction CJ between the instruction MC and the instruction MCR can be used in the five conditions below. a). The execution of the program jumps from the part of the program outside one MC/MCR loop to the part of the program outside another MC/MCR loop. b).

The execution of the program jumps from the part of the program outside the MC/MCR loop to the part of the program inside the MC/MCR loop. c). The execution of the program jumps from the part of the program inside the MC/MCR loop to the part of the program inside the MC/MCR loop. d). The execution of the program jumps from the part of the program inside the MC/MCR loop to the part of the program outside the MC/MCR loop. e). The execution of the program jumps from the part of the program inside one the MC/MCR loop to the part of the program inside another the MC/MCR loop. X0 X2 X3 X1 P1 M1000 Y1 M1000 P0 Y0 3-42 CJ MC N0 CJ P0 CJ P1 MC N1 MCR N1 MCR N0