DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming API 13 Operands: moved D : Destination device n : Start digit of the destination device for the moved digits S : Source device m 1 : Start digit to be moved from source device m 2 : Number of digits to be Explanation: 1. This instruction is able to re-allocate or combine data. When the instruction is executed, m 2 digits of contents starting from digit m 1 (from high digit to low digit) of S will be sent to m 2 digits starting from digit n (from high digit to low digit) of D . 2. M1168 is used for designating SMOV working mode. When M1168 = ON, the instruction is in BIN mode. When M1168 = OFF, the instruction is in BCD mode.
Points to note: 1. The range of m 1 : 1 – 4 3. The range of n : m 2 – 4 2. The range of m 2 : 1 – m 1 3-62 Mnemonic Operands Function Controllers SMOV P Shift Move ES2/EX2 SS2 SA2 SX2 SE Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F SMOV, SMOVP: 11 step S * * * * * * * * * m 1 * * m 2 * * D * * * * * * * * n * * PULSE 16-bit 32-bit SA2 SX2 SS2 SA2 ES2/EX2 SS2 SA2 SE SX2 ES2/EX2 SS2 ES2/EX2 SX2 SE SE