3. Instruction Set Operands: D : Destination device Explanations: 1. If the instruction is not used in pulse execution mode, the content in the designated device D will plus “1” in every scan period 2. When INC is executed, the content in D will be incremented. However, in 16-bit instruction, if +32,767 is reached and “1” is added, it will write a value of –32,768 to the destination. In 32-bit instruction, if +2,147,483,647 is reached and “1” is added, it will write a value of -2,147,483,648 to the destination. 3. This instruction is generally used in pulse execution mode (INCP, DINCP). 4. If operand D uses index F, only a 16-bit instruction is applicable.. 5.
The operation results will not affect M1020 ~ M1022. Program Example: When X0 is triggered, the content of D0 will be incremented by 1. X0 3-81 API Mnemonic Operands Function Controllers SA2 ES2/EX2 SS2 SX2 SE Controllers 24 D INC P Increment SA2 ES2/EX2 SS2 SE SX2 Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F INC, INCP: 3 steps DINC, DINCP: 5 steps D * * * * * * * * PULSE 16-bit 32-bit SA2 SS2 SA2 SA2 SX2 ES2/EX2 SS2 SX2 ES2/EX2 SX2 ES2/EX2 SS2 SE SE SE INCP D0