Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

3. Instruction Set Operands: S : Start No. of source device D : Start No. of destination device n 1 : Length of data to be shifted n 2 : Number of bits to be shifted as a group Explanation: 1. This instruction performs a right shift from source device of n 2 bits starting from S to 2. This instruction is generally used in pulse execution mode (SFTRP). destination device of n 1 bits starting from D. 3. Valid range of operand n1 , n2 : 1≤ n2 ≤ n1 ≤1024 Program Example: 1. When X0 is rising edge triggered, SFTR instruction shifts X0~X4 into 16 bit data M0~M15 and M0~M15 also shift to the right with a group of 4 bits. 2. The figure below illustrates the right shift of the bits in one scan.

 M3~M0 → Carry  M7~M4 → M3~M0  M11~M8 → M7~M4  M15~M12 → M11~M8  X3~X0 → M15~M12 completed X0 4 bits in a group shift to the right 5 Carry 1 2 3 4 3-95 API Mnemonic Operands Function Controllers SA2 ES2/EX2 SS2 SX2 SE 34 SFTR P Bit Shift Right SS2 SA2 SX2 SE Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F SFTR, SFTRP: 9 steps S * * * * D * * * n 1 * * n 2 * * PULSE 16-bit 32-bit SA2 SA2 S SE X2 ES2/EX2 SS2 SA2 SE SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SE SFTR X0 M0 K16 K4 X3 X2 X1 X0 M15 M14 M13 M1 2 M11 M10 M9 M 8 M7 M6 M5 M4 M3 M2 M1 M0