DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Operands: S : Source device D : Destination for storing result n : Number of consecutive device from S Explanations: 1. The instruction obtains the mean value from n consecutive registers from S and stores the value in D . 2. Remainders in the operation will be ignored. 3. If S is not within the valid range, only those addresses within the valid range will be processed. 4. If n is out of the valid range (1~64), PLC will determine it as an “instruction operation error”. 5. If operand D uses index F, only a 16-bit instruction is available. Program Example: 6. Valid range of operand n :
n = 1~64 When X10 = ON, the contents in 3 (n = 3) registers starting from D0 will be summed and then divided by 3 to obtain the mean value. The result will be stored in D10 and the remainder will be left out X10 (D0+D1+D2)/3 D10 D0 K100 D1 K113 K112 D10 Remainder = 3, left out D2 K125 3-110 API Mnemonic Operands Function Controllers SA2 ES2/EX2 SS2 SX2 SE Controllers 45 D MEAN P Mean ES2/EX2 SS2 SA2 SX2 SE Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F MEAN, MEANP: 7 steps DMEAN, DMEANP:
13 steps S * * * * * * * D * * * * * * * * n * * * * * * * * * * * PULSE 16-bit 32-bit SA2 SX2 SS2 SA2 SA2 SX2 ES2/EX2 SS2 ES2/EX2 SX2 ES2/EX2 SS2 SE SE SE MEAN D0 D10 K3