3. Instruction Set M1000 M1049 Y0 X2 Y1 X3 X0 Y0 X2 Y0 X1 Y1 X3 Y1 M1048 Y2 X4 ANRP 1. M1048 and D1049 are valid only when M1049 = ON. 2. When Y0 = ON for more than 10 sec and the product fails to reach the front position X2, S912 = ON 3. When Y1 = ON for more than 10 sec and the product fails to reach the back position X3, S920= ON. 4. When backward switch X1 = ON and backward device Y1 = ON, Y1 will go OFF only when the product reaches the back position switch X3. 5. Y2 is ON when any alarm is enabled. 6. Whenever X4 is ON, 1 active alarm will be reset.
If there are several active alarms, the reset will start from the alarm with the lowest number and then the alarm with second lower number, etc. 3-113 ANS T0 K100 S912 ANS T1 K200 S920