Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming X0 M1029 Y20 0.5ms 1 2 3 200 Output Y0 1ms Points to note: 1. Description of associated flags: M1029: M1029 = ON when Y0 pulse output is completed. M1030: M1030 = ON when Y1 pulse output is completed. M1102: M1102 = ON when Y2 pulse output is completed. M1103: M1103 = ON when Y3 pulse output is completed. M1539: Indicating pause status of Y1 M1540: Indicating pause status of Y2 M1541: Indicating pause status of Y3 3-142 PLSY K1000 K200 Y0 M1078: Y0 pulse output pause (immediately) M1079: Y1 pulse output pause (immediately) M1104: Y2 pulse output pause (immediately) M1105: Y3 pulse output pause (immediately) M1190:

Se t Y0 high speed output as 0.01~10Hz. (DVP-12SE does not support this function.) M1191: Se t Y1 high speed output as 0.01~10Hz. (DVP-12SE does not support this function.) M1192: Se t Y2 high speed output as 0.01~10Hz. (DVP-12SE does not support this function.) M1193: Se t Y3 high speed output as 0.01~10Hz. (DVP-12SE does not support this function.) M1347: Auto reset Y0 when high speed pulse output completed M1348: Auto reset Y1 when high speed pulse output completed M1524: Auto reset Y2 when high speed pulse output completed M1525: Auto reset Y3 when high speed pulse output completed M1538: Indicating pause status of Y0