Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

3. Instruction Set See the Y0 example below. The values of D1026/1027 in front masking area are set among -1 to -3. The masking can be done accordingly, you do not need to calculate the number of pulses in each area. C. You can set number of deceleration pulses after marking to less than 0 ( the output stopped immediately. See the Y0 example below. If you set the number of deceleration pulses after marking to less than 0 in D1232/1233, the output stopped immediately after it received the signal, whether it’s in the area of acceleration, full-speed or deceleration. 3-157