Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

3. Instruction Set a) X0: ball size sensor. b) X1: left-limit of robot arm, X2: right-limit (big balls), X3: right-limit (small balls), X4: c) Y0: raise robot arm, Y1: lower robot arm, Y2: shift to right, Y3: shift to left, Y4: clip balls. upper-limit of clamp, X5: lower-limit of clamp. 6. START circuit: X0 M1044 X1 Y4 M1000 7. Manual mode: X20 S S0 Clip balls X21 Release balls X22 Y1 Y0 X23 Y0 Raise robot arm Interlock Y1 X24 X4 Y2 Y3 Lower robot arm Y2 and Y3 interlocked and X4 = ON is the condition for output Y2 and Y3 X25 X4 Y3 Y2 Shift to right Shift to left 8. Zero return mode: a) SFC:

S1 X35 S10 Release balls Stop lowering robot arm Y0 Raise robot arm to the upper-limit (X4 = ON) X4 S11 Stop shifting to right Shift to left to reach the left-limit (X1 = ON) X1 Y3 S12 Enable zero return completed flag Zero return completed 3-161 IST X30 S20 S80 SET Y4 RST Y4 RST Y4 RST Y1 RST Y2 SET M1043 RST S12