Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming b) Ladder Diagram: S S1 X35 Enter zero return mode S S10 Release balls Stop lowering robot arm Raise robot arm to the upper-limit (X4 = ON) S S11 Stop shifting to right Shift to left and to reach the left-limit (X1 = On) S S12 Enable zero return completed flag Zero return completed 9. Auto operation (Single step / One-cycle operation / continuous operation): a) SFC:

M1041 S2 M1044 S20 Y1 X0 X5 X5 X0 S30 S40 T0 S31 X4 Y0 T1 S41 X4 Y0 X4 X4 S32 X3 X2 Y2 S42 Y2 X2 X5 X3 S50 Y1 X5 S60 T2 X4 X4 S70 Y0 S80 Y3 X1 X1 S2 3-162 SET S10 RST Y4 RST Y1 Y0 X4 SET S11 RST Y4 SET S11 RST Y1 RST Y2 Y3 X1 SET S12 RST Y2 SET S12 SET M1043 RST S12 SET M1043 RST S12 SET Y4 TMR T0 K30 SET Y4 TMR T1 K30 RST Y4 TMR T2 K30