3. Instruction Set K35: Read the first written BIT data to the BIT device (target value) and move the succeeding BIT data forward, for example, move the second BIT data to where the first written BIT data was and so on. (first in first out) S: the source start number of the M device D: the target start number of the M device Read and store the state stored from M[ S +0]+0 to the M[ D ] (target value) and move the state of the succeeding forward and change the state of the last to OFF and then diminish the index value (S+1) by 1. Note 1: When the value in S+1 is less than 1, it means there is no data to be read/moved and no action will be taken.
When the value in S+1 is bigger than n, it means the data is full and no action will be taken. “No action will be taken” means no error will be displayed nor will the index value (S+1) have any change. Note 2: M1000~M1999 cannot be used as M devices. 3-193