Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming Example: 1. Set D100=K100 and D10=K70, and execute the instruction DTM will copy the states in M100~107 to M70. After the execution of DTM is complete, add one to the value stored in D101. 2. Execute the instruciton DTM to move the stae 1 in M100 to M70 and put 0 in M107 as shown below: 3. Execute the instruciton DTM for 8 times to have the results: M70=1 and the states in M100~M107 are 0. K36: Read the last written register to the D device (target value) (last in first out). Diminish the index value (S+0) by 1 and then read and store the data stored from S+[ S +0] to the D device and put K0 to the source value S+[ S +0]. 3-194