Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

3. Instruction Set M1002 Set up communication protocol as 9600, 7, E, 1 Retain communication protocol Set up communication time-out: 100ms X0 M1129 Sending request Retry when communication time-out occurs X0 Communication instruction setting: Device address: 1 Frequency: 500Hz K0:normal forward Receiving completed M1127 Processing received data Reset M1127 PLC  VFD, PLC sends: “: 01 10 2000 0002 04 0012 01F4 C2 ” VFD  PLC, PLC sends: “: 01 10 2000 0002 CD ” Data to be sent (sending messages) 3-299 MOV H86 D1120 SET M1120 MOV K100 D1129 SET M1122 FWD K1 K500 K0 RST M1127 Data Descriptions ‘0’ 30 H ADR 1 ADR 0 Address of AC motor drive: ADR (1,0) ‘1’ 31 H ‘1’ 31 H CMD 1 CMD 0 Command code:

CMD (1,0) ‘0’ 30 H ‘2’ 32 H Data Address ‘0’ 30 H ‘0’ 30 H ‘0’ 30 H ‘0’ 30 H Data content ‘0’ 30 H ‘0’ 30 H ‘2’ 32 H ‘0’ 30 H Byte Count ‘4’ 34 H ‘0’ 30H Data content 1 H1: forward operation ‘0’ 30 H ‘1’ 31 H ‘2’ 32 H ‘0’ 30 H Data content 2 Operation frequency = K500Hz H01F4 ‘1’ 31 H ‘F’ 46 H ‘4’ 34 H ‘C’ 43 H LRC CHK 1 LRC CHK 0 Error checksum: LRC CHK (0,1) ‘2’ 32 H