Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

3. Instruction Set 105 Operands: S : Device address n : Status content to be retrieved Explanations: 2. M1177= ON, RDST instruction supports COM2(RS-485), COM3(RS-485). 1. M1177 = OFF (Default), RDST instruction supports COM2(RS-485). 3. M1177 has to be set up in advance for selecting the target model of VFD. When M1177 = OFF (Default), RDST instruction supports Delta’s VFD-A inverter. When M1177 = ON, the instruction supports other models of VFD inverters, e.g. VFD-B, VFD. 4. There is no limitation on the times of using RDST instruction, however only one instruction can be executed on single COM port at a time 5.

Rising-edge contacts (LDP, ANDP, ORP) and falling-edge contacts (LDF, ANDF, ORF) can not be used with RDST instructions. Otherwise, the data in receiving registers will be incorrect. 6. For detailed information of associated flags and special registers, please refer to RS instruction. 7. M1177 = OFF, only VFD-A is supported a) Range of S : K0 ~ K31 b) Range of n : K0 ~ K3 c) n : Status content to be retrieved n=0, frequency n=1, output frequency n=2, output current n=3, Operation command d) The feedback data consists of 11 bytes (refer to VFD-A user manual), and will be stored in low bytes of D1070 ~ D1080.

” Q, S, B, Uu, Nn, ABCD ” 3-301 Mnemonic Operands Function Controllers RDST Read VFD Status ES2/EX2 SS2 SA2 SX2 SE Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F RDST: 5 steps S * * * n * * * PULSE 16-bit 32-bit SA2 SA2 SA2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 SE SE SE Feedback Explanation Data storage Q Header of question string: ’Q’ (51H). D1070 low S Checksum: 03H. D0171 low B Acknowledge back. Correct: 06H, Error: 07H. D1072 low U Communication address (range: 00~31). Displayed in ASCII format. D1073 low U D1074 low N Status content to be retrieved (00 ~ 03). Displayed in ASCII format. D1075 low D1076 low A Retrieved status content.

The content of ”ABCD” differs according to value 00~03 set in NN. 00 ~ 03 indicates frequency, current and operation mode respectively. Please refer to the explanations below for details. D1077 low B D1078 low C D1079 low D D1080 low