Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming 111 Operands: S 1 : Lower bound of zone comparison S 2 : Upper bound of zone comparison S : Comparison value D : Comparison result, 3 consecutive devices Explanations: 1. The data of S is compared to the data range of S 1 ~ S 2 and the result ( > , = , < ) is indicated by three bit devices in D . 2. If the source operand S 1 or S 2 is specified as constant K or H, the integer value will automatically be converted to binary floating point for comparison. 3. Operand S 1 should be smaller than operand S 2.

When S 1 > S 2 , the instruction takes S 1 as the 1 st comparison value and performs normal comparison similar to ECMP instruction. Program Example: 1. If the specified device is M10, M10~M12 will automatically be used. 2. When X0 = ON, one of M10~M12 will be ON. When X0 = OFF, DEZCP instruction is not executed, M10~M12 will retain their previous state before X0 = OFF. 3. RST or ZRST instruction is required if users need to reset the comparison result.

X0 M10 M10 M10 = ON when (D1,D0)>(D21,D20) M11 M11 = ON when (D1,D0) (D21,D20) M12 M12 = ON when (D21 D20)>(D11,D10) , 3-314 Mnemonic Operands Function Controllers D EZCP P Floating point zone compare ES2/EX2 SS2 SA2 SX2 SE Typ e OP Bit Devices Word devices Program Steps X Y M S K H K nX KnY KnM KnS T C D E F DEZCP, DEZCPP: 17 steps S 1 * * * S 2 * * * S * * * D * * * PULSE 16-bit 32-bit SA2 SA2 SA2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 SE SE SE DEZCP D0 D10 D20