DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming API 122 Operands: S 1 : Multiplicand S 2 : Multiplicator D : Multiplication result Explanations: 1. S 1 S 2 D . The floating point value in S 1 is multiplied with the floating point value in S 2 and the result is D . The multiplication is conducted in binary floating point format 2. If S 1 or S 2 is designated as constant K or H, the instruction will convert the constant into a binary floating point value before the operation 3. S 1 and S 2 can designate the same register.
In this case, if the instruction is specified as “continuous execution instruction” (generally DEMULP instruction) and the drive contact is ON, the register will be multiplied once in every scan. 4. Flags: M1020 (Zero flag), M1021 (Borrow flag) and M1022 (Carry flag) If absolute value of the result exceeds max. floating point value, carry flag M1022 = ON. If absolute value of the result is less than min. floating point value, borrow flag M1021 = ON. If the conversion result is 0, zero flag M1020 = ON. Program Example 1: When X1 = ON, binary floating point (D1, D0) multiplies binary floating point (D11, D10) and the result is stored in (D21, D20). X1 Program Example 2:
When X2 = ON, K1234 (automatically converted into binary floating point value) multiplies binary floating point (D1, D0) and the result is stored in (D11, D10). X2 3-330 Operands Function Controllers EMUL P Floating point multiplication ES2/EX2 SS2 SA2 SX2 SE Typ e OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F DEMUL, DEMULP: 13 steps S 1 * * * S 2 * * * D * PULSE 16-bit 32-bit SA2 SA2 SA2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 SE SE SE 1 DEMUL D0 D10 D20 DEMUL K1234 D0 D10