3. Instruction Set Operands: S 1 : Dividend S 2 : Divisor D : Quotient and Remainder Explanation: 1. S 1 S 2 D . The floating point value in S 1 is divided by the floating point value in S 2 and the result is stored in D . The division is conducted in binary floating point format. 2. If S 1 or S 2 is designated as constant K or H, the instruction will convert the constant into a binary floating point value before the operation. 3. If S 2 = 0, operation error will occur, the instruction will not be executed 4. Flags: M1020 (Zero flag), M1021 (Borrow flag) and M1022 (Carry flag) If absolute value of the result exceeds max. floating point value, carry flag M1022 = ON.
If absolute value of the result is less than min. floating point value, borrow flag M1021 = ON. If the conversion result is 0, zero flag M1020 = ON. Program Example 1: When X1 = ON, binary floating point value of (D1, D0) is divided by binary floating point (D11, D10) and the quotient and remainder is stored in (D21, D20). X1 Program Example 2: When X2 = ON, binary floating point value of (D1, D0) is divided by K1234 (automatically converted to binary floating point value) and the result is stored in (D11, D10).
X2 3-331 API Mnemonic Operands Function Controllers 123 D EDIV P Floating point division ES2/EX2 SS2 SA2 SX2 SE Typ e OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F DEADD, DEADDP: 13 steps S 1 * * * S 2 * * * D * PULSE 16-bit 32-bit SA2 SA2 SA2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 SE SE SE DEDIV D0 D10 D20 DEDIV D0 K1234 D10