Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming API 124 Operands: S : Exponent D : Operation result Explanations: 1. The base is e = 2.71828 and exponent is S 2. EXP [ S +1, S ] = [ D +1, D ] 3. Both positive and negative values are valid for S . Register D has to be 32-bit format. Operation is conducted in floating point value, so the value in S needs to be converted into floating value before exponent operation. 4. The content in D : e S , e =2.71828 and S is the specified exponent.. 5. Flags: M1020 (Zero flag), M1021 (Borrow flag) and M1022 (Carry flag). If absolute value of the result is larger than max. floating value, carry flag M1022 = ON.

If absolute value of the result is smaller than min. floating value, borrow flag M1021 = ON. If the conversion result is 0, zero flag M1020 = ON. Program Example: 1. When M0 = ON, convert (D1, D0) to binary floating value and save the result in (D11, D10). 2. When M1= ON, perform exponent operation with (D11, D10) as the exponent. The value is saved in register (D21, D20) in binary floating format. 3. When M2 = ON, convert the value in (D21, D20) into decimal floating point value and save the result in (D31, D30).

(At this time, D31 indicates powers of 10 for D30) M0 M1 M2 3-332 Mnemonic Operands Function Controllers D EXP P Float exponent operation ES2/EX2 SS2 SA2 SX2 SE Typ e OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F DEXP, DEXPP: 9 steps S * * * D * PULSE 16-bit 32-bit SA2 SA2 SA2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 SE SE SE RST M1081 DFLT D0 D10 DEXP D10 D20 DEBCD D20 D30