3. Instruction Set API 125 Operands: S : Source device D : Operation result Explanations: 1. Perform natural logarithm (LN) operation on operand S : LN[ S +1, S ]=[ D +1, D ] 2. Only a positive number is valid for S . Register D has to be 32-bit format. Operation is conducted in floating point value, so the value in S needs to be converted into floating value before natural logarithm operation. 3. e D = S . The content of D = LN S, where the value in S is specified by users. 4. Flags: M1020 (Zero flag), M1021 (Borrow flag) and M1022 (Carry flag). If absolute value of the result is larger than max. floating value, carry flag M1022 = ON. If absolute value of the result is smaller than min.
floating value, borrow flag M1021 = ON. If the conversion result is 0, zero flag M1020 = ON Program Example: 1. When M0 = ON, convert (D1, D0) to binary floating value and save the result in (D11, D10). 2. When M1= ON, perform natural logarithm operation with (D11, D10) as the antilogarithm. The value is saved in register (D21, D20) in binary floating format. 3. When M2 = ON, convert the value in (D21, D20) into decimal floating point value and save the result in (D31, D30).
(At this time, D31 indicates powers of 10 for D30) M0 M1 M2 3-333 Mnemonic Operands Function Controllers D LN P Float natural logarithm operation ES2/EX2 SS2 SA2 SX2 SE Typ e OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F DLN, DLNP: 9 steps S * * * D * PULSE 16-bit 32-bit SA2 SA2 SA2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 SE SE SE RST M1081 DFLT D0 D10 DLN D10 D20 DEBCD D20 D30