DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming API 126 Operands: S 1 : Base S 2 : Antilogarithm D : Operation result Explanations: 1. Perform logarithm operation with S 1 as the base and S 2 as the antilogarithm and save the result in D . 2. Only a positive number is valid for S . Register D has to be 32-bit format. Operation is conducted in floating point value, so the value in S needs to be converted into floating value before logarithm operation. 3. Logarithm operation: S 1 D = S 2 , D = ? Log S1 S2 = D Example: Assume S 1 = 5, S 2 = 125, S 1 D = S 2 , D = ? 5 D = 125 D = Log S1 S2 = log 5 125 = 3. 4. Flags:
M1020 (Zero flag), M1021 (Borrow flag) and M1022 (Carry flag). If absolute value of the result is larger than max. floating value, carry flag M1022 = ON. If absolute value of the result is smaller than min. floating value, borrow flag M1021 = ON. If the conversion result is 0, zero flag M1020 = ON. Program Example: 1. When M0 = ON, convert (D1, D0) and (D3, D2) to binary floating value and save the result in register (D11, D10) and (D13, D12) individually. 2. When M1= ON, perform logarithm operation with (D11, D10) as base and (D13, D12) as 3. When M2 = ON, convert the value in (D21, D20) into decimal floating point value and save the antilogarithm.
The results are saved in register (D21, D20) in binary floating format. result in (D31, D30). (At this time, D31 indicates powers of 10 for D30) M0 M1 M2 3-334 Mnemonic Operands Function Controllers D LOG P Float logarithm operation ES2/EX2 SS2 SA2 SX2 SE Typ e OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F DLOG, DLOGP: 13 steps S 1 * * * S 2 * * * D * PULSE 16-bit 32-bit SA2 SA2 SA2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 ES2/EX2 SS2 SX2 SE SE SE RST M1081 DFLT D0 D10 DFLT D2 D12 DLOG D10 D12 D20 DEBCD D20 D30