3. Instruction Set X7 S D 1 D 2 Timeout period 5 seconds completed flag Program Example: (for DVP-ES2/EX2 series PLCs whose version is 3.20/DVP-SA2 series PLCs whose version is 2.60/DVP-SE series PLCs whose version is 1. When X7 = On, the absolute position data read from Delta ASDA-A2 servo will be stored in the 1.40/DVP-SX2 series PLCs whose version is 2.40 (and above)) registers D0~D3. The state of M1580 and the state of M1581 indicates whether the reading of the absolute position is successful. X7 Used with Delta ASDA-A2 servo X7 S D 1 D 2 M1580 ABS absolute position data read completed Execution completed M1581 ABS absolute position data read is abnormal Execution error Points to note:
(Used with Mitsubishi MR-J2 Servo drive) 1. Timing diagram of the operation of DABSR instruction: 3-397 DABSR X0 Y4 D1348 M11 TMR T0 K50 Timeou ABSR completed T0 ABS absolute position M10 data read is abnormal ABSR timeout M1029 ABS absolute posit SET M11 data read is comple DABSR X0 Y4 D1348 TMR T0 K50 SET M11 SET M1177 DABSR X0 Y4 D0 SET M11 SET M12