Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming 2. Registers for setting ramp up/down time and start/end frequency:  Output Y0: Sample time of ramp-up Pulse output frequency Ramp-up slope Start freq. End freq. Y0(D1340) Y0 (D1340) Min: 6Hz Min: 6Hz Target position Ramp down time Ramp up time Default: 100ms Current position Default: 100ms Y0(D1343) Y0(D1343)  This instruction can be used many times in user program, but only one instruction will be activated at a time. For example, if Y0 is currently activated, other instructions use Y0 won’t be executed. Therefore, instructions first activated will be first executed.

 After activating the instruction, all parameters cannot be modified unless instruction is OFF.  For associated special flags and special registers, please refer to Points to note of DDRVI instruction. 3-412