DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming 266 Operands: D : Destination output device n : Device specifying the output bit Explanations: 1. For ES2/EX2 models, only V1.20 or above supports the function. 2. Available range for the value in operand n : K0~K15 for 16-bit instruction; K0~K31 for 32-bit instruction. 3. BOUT instruction performs bit output on the output device according to the value specified by operand n. Status of Coils and Associated Contacts: Program Example: X0 X1 Instruction: Operation: LDI X0 Load NC contact X0 AND X1 Connect NO contact X1 in series.
BOUT K4Y0 D0 When D0 = k1, executes output on Y1 When D0 = k2, executes output on Y2 3-506 Mnemonic Operands Function Controllers D BOUT Output Specified Bit of a Word ES2/EX2 SS2 SA2 SX2 SE Type OP Bit Devices Word devices Program Steps X Y M S K H KnX KnY KnM KnS T C D E F BOUT: 5 steps DBOUT: 9 steps D * * * * * * n * * * * * * * * * * * PULSE 16-bit 32-bit ES2/ EX2 SS2 SA2/ SE SX2 ES2/ SA2/ ES2/ SA2/ SS2 SX2 SS2 SX2 EX2 SE EX2 SE BOUT instruction Evaluation result Associated Contacts Coil NO contact(normally open) NC contact(normally closed) FALSE OFF Current blocked Current flows TRUE ON Current flows Current blocked BOUT K4Y0 D0