Delta DVP-ES2 — 3.8 Detailed Instruction Explanation

3. Instruction Set S 2 +0: Communication combination function code Note #1 : W and R mean that a writing communication command is executed first, and then a reading communication command is executed. If the function code used is K3, the D operand 3-519 Number Description Remark S 2+3 Communication data length It is used to set the length of the data read/written. A word is a unit of measurement for length. The maximum number of words which can be read/written is 16. Function Function Attribute#1 code K0 R or W There is no communication combination. Users can define a DMV communication command.

Please refer to DMO Module Manual for more information about the registers which can be read/written. The data read/written are stored in the devices starting from D . 1 K1 W and R Communication combination commands sent to a DMV#2: 1) DMV trigger 1 is enabled. 2) The value in S 2+3 indicates the number of data read from the output data area in a DMV. (The maximum number of words which can be read is 16.) The data read is stored in the devices starting from D . 1 K2 W Communication combination commands sent to a DMV: 1) The DMV program number indicated by the value in D is used. 1 (The value in D is in the range of 0 to 31.) 1 2) DMV trigger 1 is enabled.

K3 W and R Communication combination commands sent to a DMV: 1) The DMV program number indicated by the value in D is used. 1 (The value in D is in the range of 0 to 31.) 1 2) DMV trigger 1 is enabled. 3) The value in S 2+3 indicates the number of data read from the output data area in a DMV. (The maximum number of words which can be read is 16.) The data read is stored in the devices starting from D . 1 K4 W Communication combination commands sent to a DMV: 1) The values in D +0 and D +1 are written into internal memory 1. 1 1 2) DMV trigger 1 is enabled. K5 W and R Communication combination commands sent to a DMV: 1) The values in D +0 and D +1 are written into internal memory 1.

1 1 2) DMV trigger 1 is enabled. 3) The value in S 2+3 indicates the number of data read from the output data area in a DMV. (The maximum number of words which can be read is 16.) The data read is stored in the devices starting from D . 1 K6 W Communication combination commands sent to a DMV: 1) The values in D +0 and D +1 are written into internal memory 2. 1 1 2) DMV trigger 1 is enabled. K7 W and R Communication combination commands sent to a DMV: 1) The values in D +0 and D +1 are written into internal memory 2. 1 1 2) DMV trigger 1 is enabled. 3) The value in S 2+3 indicates the number of data read from the output data area in a DMV.

(The maximum number of words which can be read is 16.) The data read is stored in the devices starting from D . 1