3. Instruction Set The following table shows the CANopen error codes. 3-551 D6033 D6035 D6037 D6039 D6041 D6043 D6045 D6047 Target command position(P0-10) D6048 D6049 D6050 D6051 D6052 D6053 D6054 D6055 D6056 D6057 D6058 D6059 D6060 D6061 D6062 D6063 Error Code Cause 0x0002 The slave does not respond to the SDO message. 0x0003 An error occurs in the message received by the slave. This error often occurs when the settings of the COPRW instruction are invalid causing the slave not to receive the complete message. 0x0004 The slave PDO message is not received. 0x0005 An error occurs while using the instruction operand.
0x0006 One of the stations is being used when the INITC instruction is executed. 0x0007 An error occurs in ID assignment 0x0008 RSTD instruction reset error