DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming 8. Zero return mode: a) SFC: S1 X35 S10 Release balls Stop lowering robot arm Raise robot arm to the upper-limit (X4 = ON) X4 Y0 S11 Stop shifting to right X1 Y3 Shift to left to reach the left-limit (X1 = ON) S12 Enable zero return completed flag Zero return completed b) Ladder Diagram:
S S1 X35 Enter zero return mode S S10 Release balls Stop lowering robot arm Raise robot arm to the upper-limit (X4 = ON) S S11 Stop shifting to right Shift to left and to reach the left-limit (X1 = On) S S12 Enable zero return completed flag Zero return completed 5-26 RST Y4 RST Y1 RST Y2 SET M1043 RST S12 SET S10 RST Y4 RST Y1 Y0 X4 SET S11 RST Y4 SET S11 RST Y1 RST Y2 Y3 X1 SET S12 RST Y2 SET S12 SET M1043 RST S12 SET M1043 RST S12