Delta DVP-ES2 — 5.6 IST Instruction

5. Sequential Function Chart 5. Control panel Power ON Zero return Auto ON X35 X36 Power OFF Auto OFF X37 Clip balls Ascend Right Shift Step X32 X20 X22 X24 Zero return X31 One cycle operation X33 Left shift Release balls Descend Continuous operation X34 Manual operation X30 X21 X23 X25 a) X0: ball size sensor. b) X1: left-limit of robot arm, X2: right-limit (big balls), X3: right-limit (small balls), X4: upper-limit of clamp, X5: lower-limit of clamp. c) Y0: raise robot arm, Y1: lower robot arm, Y2: shift to right, Y3: shift to left, Y4: clip balls. 6. START circuit: X0 M1044 X1 Y4 M1000 7. Manual mode:

Y4 S S0 X20 SET Clip balls X21 X22 Y1 Y4 Release balls Y0 X23 Y0 Raise robot arm Interlock Y1 X24 X4 Lower robot arm Y2 and Y3 interlocked and X4 = ON is the condition for output Y2 and Y3 Y2 Y3 Shift to right X25 X4 Y3 Y2 Shift to left 5-25 IST X30 S20 S80 RST