DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming 7.2.2 The Profile 7.2.3 The CAN Interface and the Network Topology The pins of COM3 (CAN interface) The CAN signal and the data frame format The CAN signal is a differential signal. The voltage of the signal is the voltage difference between CAN+ and CAN-. The voltage of CAN+ and that of CAN- take SG as a reference point. The CAN network can be in two states. One is a dominant level, and is indicated by the logical “0”. The other is a recessive level, and is indicated by the logical “1”. The CAN signal level is shown below.
Dominant Recessive 7-4 Pin Description White (CAN H) _ Blue (CAN L) _ CAN+ CAN- SG D+ Black(SG) D- Tighten it with a slotted screwdriver. CAN+ CAN-H CAN- CAN-L SG Signal ground