7 CANopen Function and Operation ResID: Same as the request ID in the request message. Size: The length of the message data. Max. 20 bytes. Unit: byte. When writing, it is 4; the data length is decided by the data type of index and subindex when reading. Node ID: The node address of the target equipment on CANopen network. Type: In SDO response message, 43 (Hex) refers to reading 4 bytes of data; 4B (Hex) refers to reading 2 bytes of data; 4F (Hex) refers to reading 1 byte of data; 60 (Hex) refers to writing 1/2/4 byte(s) of data; 80 (Hex) refers to stopping SDO command. Example 1: Write 010203E8 (hex) to (Index_subindex) 2109_0 of slave of No.
3 through SDO and the data type of (Index_subindex) 2109_0 is double words (32 bits). Request data: Response data: Example 2: Read the value of (Index_subindex) 2109_0 of slave of No. 3 through SDO and the data type of (Index_subindex) 2109_0 is double words (32 bits). Request data: 7-17 Status code Explanation 7 Error: Equipment to be sent messages is busy. 8 Error: Illegal type 9 Error:
Incorrect node address 0A Error message (See the error code for SDO response message) 0B~FF Reserved Request message PLC device High byte(Hex) Low byte(Hex) D6250 Message Header ReqID=01 Command =01 D6251 Reserved =0 Size =8 D6252 Type =02 Node ID =03 D6253 Message data Main index high byte =21 Main index low byte =09 D6254 Reserved =0 Subindex =0 D6255 Datum 1=03 Datum 0=E8 D6256 Datum 3=01 Datum 2=02 Response message PLC device High byte(Hex) Low byte(Hex) D6000 Message Header ResID =01 Command =01 D6001 Reserved =0 Size =4 D6002 Type =60 Node ID =03 D6003 Message data Main index high byte =21 Main index low byte =09 D6004 Reserved =0 Subindex =0 D6005 Datum 1=00 Datum 0=00 D6006 Datum 3=00 Datum 2=00 Request message PLC device High byte(Hex) Low byte(Hex) D6250 Message Header ReqID =01 Command =01 D6251 Reserved =0 Size =4 D6252 Type =01 Node ID =03 D6253 Message data Main index high byte =21 Main index low byte =09 D6254 Reserved =0 Subindex =0 D6255 Datum 1=0 Datum 0=0 D6256 Datum 3=0 Datum 2=0