Delta DVP-ES2 — 7.6 Application Example

7 CANopen Function and Operation 5) After the steps above are finished, the download will be performed as the figure shows below. Note: The new parameters after being downloaded will be effective unless DVP-ES2-C is re-powered.  Network Scanning: Scan the master and slave on the CANopen network by clicking menu “Network”>>”Online”. The scanned master and slave are displayed on the page below. For detailed operation steps, please refer to Section 11.1.1 in the help file of CANopen Builder software.  Node Configuration: Double click the slave icon on the above page and then the following “Node configuration” dialog box pops up.

 “Error Control Protocol” Used for setting the error control protocol for master to monitor if the slave is offline. 7-29