Appendix C Inforamation about TP Series Text Panels C-11 OFF STOP RUN Special Content Latch Attrib.
Default D -ed ON RUN STOP D1800* ↓ D1815* The data which is read from slave ID#11 in the PLC LINK 0 - - R NO 0 D1816* ↓ D1831* The data which is written into slave ID#11 in the PLC LINK 0 - - R/W NO 0 D1832* ↓ D1847* The data which is read from slave ID#12 in the PLC LINK 0 - - R NO 0 D1848* ↓ D1863* The data which is written into slave ID#12 in the PLC LINK 0 - - R/W NO 0 D1864* ↓ D1879* The data which is read from slave ID#13 in the PLC LINK 0 - - R NO 0 D1880* ↓ D1895* The data which is written into slave ID#13 in the PLC LINK 0 - - R/W NO 0 D1896* ↓ D1911* The data which is read from slave ID#14 in the PLC LINK 0 - - R NO 0 D1900* ↓ D1931* Specify the station number of Slaves for PLC-Link when M1356 is ON.
Consecutive station numbers set by D1399 will be invalid in this case. Note that the registers are latched only when M1356 is ON.
0 - - R/W NO D1912* ↓ D1927* The data which is written into slave ID#14 in the PLC LINK 0 - - R/W NO 0 D1928* ↓ D1943* The data which is read from slave ID#15 in the PLC LINK 0 - - R NO 0 D1944* ↓ D1959* The data which is written into slave ID#15 in the PLC LINK 0 - - R/W NO 0 D1960* ↓ D1975* The data which is read from slave ID#16 in the PLC LINK 0 - - R NO 0 D1976* ↓ D1991* The data which is written into slave ID#16 in the PLC LINK 0 - - R/W NO 0 D1994 Remaining times for PLC password setting on DVP-PCC01 0 - - R/W NO 0 D1995 Data length for PLC ID Setting on DVP-PCC01 0 - - R/W NO 0 D1996 1st Word of PLC ID Setting for DVP-PCC01 (Indicated by Hex format corresponding to ASCII codes) 0 - - R/W NO 0 D1997 2nd Word of PLC ID Setting for DVP-PCC01 (Indicated by Hex format corresponding to ASCII codes) 0 - - R/W NO 0 D1998 3rd Word of PLC ID Setting for DVP-PCC01 (Indicated by Hex format corresponding to ASCII codes) 0 - - R/W NO 0 D1999 4th word of PLC ID Setting for DVP-PCC01 (Indicated by Hex format corresponding to ASCII codes) 0 - - R/W NO 0