Delta DVP-ES2 — C.3 Special Auxiliary Relay

DVP-ES2/EX2/SS2/SA2/SX2/SE&TP Operation Manual - Programming C.3 Special Auxiliary Relay The types and functions of special auxiliary relays (special M) are listed in the table below. Care should be taken that some devices of the same No. may bear different meanings in different series MPUs. Columns marked with “R” refers to “read only”, “R/W” refers to “read and write”, “-“ refers to the status remains unchanged and “#” refers to that system will set it up according to the status of the PLC. C-12 OFF STOP RUN Special D Content Latch    Attrib. Default -ed ON RUN STOP D4000 ↓ D4999 Present value of an object in the TP program D4000: Present value of object 1 D4001:

Present value of object 2 … D4999: Present value of object 999 - - - R/W NO 0 OFF STOP RUN Special Latch- Function    Attrib. Default M ed ON RUN STOP M1000* Monitor normally open contact OFF ON OFF R NO OFF M1001* Monitor normally closed contact ON OFF ON R NO ON M1002* Enable single positive pulse at the moment when RUN is activate (Normally OFF) OFF ON OFF R NO OFF M1003* Enable single negative pulse at the moment when RUN is activate (Normally ON) ON OFF ON R NO ON M1004* ON when syntax errors occur OFF OFF - R NO OFF M1008* Watchdog timer (ON:

PLC WDT time out) OFF OFF - R NO OFF M1009 Indicate LV signal due to 24VDC insufficiency OFF - - R NO OFF M1011* 10ms clock pulse, 5ms ON/5ms OFF OFF - - R NO OFF M1012* 100ms clock pulse, 50ms ON / 50ms OFF OFF - - R NO OFF M1013* 1s clock pulse, 0.5s ON / 0.5s OFF OFF - - R NO OFF M1014* 1 min clock pulse, 30s ON / 30s OFF OFF - - R NO OFF M1015* Enable high-speed timer OFF - - R/W NO OFF M1016* Indicate Year display mode of RTC.

OFF - - R/W NO OFF M1017* ±30 seconds correction on real time clock OFF - - R/W NO OFF M1018 Flag for Radian/Degree, ON for degree OFF - - R/W NO OFF M1020 Zero flag OFF - - R NO OFF M1021 Borrow flag OFF - - R NO OFF M1022 Carry flag OFF - - R NO OFF M1024 COM1 monitor request OFF - - R/W NO OFF