Chapter 6 Applied Instructions 7. ST Example Explanation 7.1 When M0 is ON, Y0 outputs 1000 pulses at 1 kHz. 7.2 When the pulse output completes, SM461 is ON and SM470=ON is triggered. 7.3 The pulse output restarts when M0 changes from OFF to ON again 7.4 When there are more than two high-speed output instructions in a program, do not use the variable name, M1, repeatedly. 7.5 It is suggested not to use ST language in a program if there is any chance the outputting needed to be stopped. 8. Function block example Main program 6_ Function block 1 6-801