Chapter 6 Applied Instructions 6_ Symbol S 1 : X axis target coordinate (relative positioning) S 2 : Y axis target coordinate (relative positioning) S 3 : The shift of the center or the central angle S 4 : Target reference frequency S 5 : Function selection D 1 : Pulse output device for the X axis D 2 : Pulse output device for the Y axis Explanation 1. S 1 , S 2 and S 3 respectively designate the X axis target coordinate, Y axis target coordinate (relative position) and the shift of the center or a central angle of a circle. Refer to the following clockwise arc operation for details. 2. D 1 and D 2 are the pulse output devices for the X and Y axes respectively.
Refer to the DPPMR instruction (API 2710) for the selection of output points and output modes for the axes. 6-827 API Instruction Operand Description 2712 D CICR S1,S2,S3,S4,S5,D1,D2 2-Axis relative-position clockwise arc interpolation Device X Y M S T C HC D FR SM SR E K 16# “$” F S1 S2 S3 S4 S5 D1 D2 BOOL WORD DWORD LWORD UINT INT DINT LINT REAL LREAL TMR CNT STRING Data type S1 S2 S3 S4 S5 D1 D2 Pulse Instruction 16-bit instruction 32-bit instruction - - ES3