Chapter 6 Applied Instructions Drawing a clockwise arc 1. Define the four quadrants (QI, QII, QIII and QIV) of a coordinate system as in the graph below. Point A indicates the current coordinates on the X and Y axes. Y I II A X III IV 2. Point B is the target coordinates specified by S 1 and S 2 . Point O is the center of a circle enclosing both point A and point B. 3. S 3 is the distance to shift the center point O. S 3 can also be the distance to shift the center point or central angle, if it is defined as the central angle, it is the included angle of AOB. 4. The point A represents the origin of the axes X and Y in a plane.
The target point B can be in Quadrant I, II, III, IV of center point or central angle) in S 3 to define an arc travel path. the plane. Use the target point B to connect to the point A to draw a line and then use the setting values (shift the The figures below show 2 arc-travel path examples (solid lines) when the point B is in Quadrant I and IV with different setting values in S 3 (shift the center point). (r: radius) 6_ B S 3 >= 0 O A r O B S 3 r S 3 >= 0 S 3 A 6-829