Delta DVP-ES3 — 6.26.2 Explanation of High-speed Output Instructions

Chapter 6 Applied Instructions Explanation 1. This instruction performs 2-axis relative-position clockwise arc interpolation. S 1 , S 2 and S 3 respectively designate the target coordinate on X axis, target coordinate on Y axis, and the shift of the center of a circle. Refer to the following operation for drawing the counterclockwise arc for details. 2. D 1 and D 2 are the output devices for the X and Y axes respectively. Refer to the DPPMR instruction (API 2710) for the selection of output points and output mode for the axes. 3. S 4 sets the target frequency for the reference.

The target reference frequency is used for the prior calculation when the PLC plans the travel path for the arc, after the instruction is executed. If the estimated calculation process cannot achieve the planned arc travel path, the output frequency is automatically decreased so as to fulfill the synchronized arc drawing function. 4. S 5 is the setting value for function selection. See the descriptions below. 6_ 5. Refer to Example 2 from the DPPMR instruction (API 2710) for programming in ST language. 6-837 Setting value in S5 S3 : The shift of the center or central angle Description 0 Shift of the center (32-bit integer type) The arc resolution uses a 10° arc as the basic angle for motion.

1 Shift of the center (32-bit integer type) The arc resolution uses a 5° arc as the basic angle for motion. 2 Shift of the center (32-bit integer type) The arc resolution uses a 1° arc as the basic angle for motion. 10 Shift of central angle (floating point type) The arc resolution uses a 10° arc as the basic angle for motion. 11 Shift of central angle (floating point type) The arc resolution uses a 5° arc as the basic angle for motion. 12 Shift of central angle (floating point type) The arc resolution uses a 1° arc as the basic angle for motion. Other Shift of the center (32-bit integer type) Seen as setting value in S5 is 0 The arc resolution uses a 10° arc as the basic angle for motion.