Delta DVP-ES3 — 6.26.2 Explanation of High-speed Output Instructions

DVP-ES3 Series Programming Manual Drawing the counterclockwise arc 1. Define the four quadrants (QI, QII, QIII and QIV) of a coordinate system as below. Point A indicates the current coordinates on X and Y axes. Y I II A X III IV 2. Point B is the target coordinates specified by S 1 and S 2 . Point O is the center of a circle containing points A and B. 3. S 3 is the distance to shift the center point O. S 3 can also be the distance to shift the center point or central angle, if it is defined as the central angle, it is the included angle of AOB. 4. The point A represents the origin of the axes X and Y in a plane. The target point B can be in Quadrant I, II, III, IV of the plane.

Use the target point B to connect to the point A to draw a line and then use the setting values (shift the center point or the central angle) in S 3 to define an arc travel path. The figures below show 2 arc-travel path examples (solid lines) when the point B is in Quadrant I and IV with different setting values in S 3 (shift the center point). (r: radius) B O S 3 B S 3 >= 0 A r O r A S 3 >= 0 S 3 6-838 6 _