Delta DVP-ES3 — 6.26.2 Explanation of High-speed Output Instructions

DVP-ES3 Series Programming Manual Symbol S 1 : A number listed in the position planning table _6 S 2 : Target position of the X axis S 3 : Target position of the Y axis S 4 : Target speed Explanation 1. This instruction sets the 2-axis linear interpolation parameters in the position planning table. S 1 is the number listed in the position planning table. If the number does not exist in the table or the output of the number does not belong to the 2-axis linear interpolation, the instruction is not executed, SM0 is ON and the error code is SR0=16#2027. 2. S 2 and S 3 are respectively the target positions of the X and Y axes, which can only be 32-bit integers.

If you use the mechanical unit conversion when editing the position planning table in ISPSoft, use the conversion instruction for modification first. 6-856 API Instruction Operand Description 2720 D TPWL P S1,S2,S3,S4 Setting linear interpolation parameters in the position planning table Device X Y M S T C HC D FR SM SR E K 16# “$” F S1     S2     S3     S4     BOOL WORD DWORD LWORD UINT INT DINT LINT REAL LREAL TMR CNT STRING Data type S1   S2   S3   S4   Pulse Instruction 16-bit instruction 32-bit instruction ES3 - ES3