Delta DVP-ES3 — 7.4 LED Indicators and Error Codes for CPU Modules

DVP-ES3 Series Programming Manual _7 7-16 ERROR LED indicator status Error CPU Description code status Blinking Blinking Blinking ON OFF fast normally slowly 200D The binary to binary-coded decimal conversion is incorrect. Continue V 200E The string does not end with 00. Continue V 2012 Incorrect division operation Continue V 2013 The value exceeds the range of values which can be represented by the floating-point numbers. Continue V 2014 The task designated by the TKON or YKOFF instruction is incorrect, or exceeds the range. Continue V 2017 The instruction BREAK is written outside of the FOR-NEXT loop. Continue V 2027 No such position planning table number or the format is incorrect.

Continue V 2028 The high speed output instruction is being executed. Only one instruction can be executed at a time. Continue V 6004 The IP address filter is set incorrectly. Continue V 600D RJ45 port is not connected. Continue V 6010 The number of the MODBUS TCP connections exceeds the range. Continue V 6011 The number of the EtherNet/IP connections exceeds the range. Continue V 6012 There are devices using the same IP address. Continue V 6100 The email connection is busy. Continue V 6103 The trigger attachment mode in the email is set incorrectly. Continue V 6104 The attachment in the email does not exist. Continue V 6105 The attachment in the email is too big.

Continue V 6106 There is an SMTP server response timeout. Continue V 6107 There is an SMTP server response timeout. Continue V 6108 SMTP verification failed Continue V 6200 The remote communication IP address set in the TCP socket function is illegal. Continue V 6201 The local communication port set in the TCP socket function is illegal. Continue V 6202 The remote communication port set in the TCP socket function is illegal. Continue V 6203 The device from which the data is sent in the TCP socket function is illegal. Continue V 6206 The device that receives the data in the TCP socket function is illegal.

Continue V 6208 The data that is received through the TCP socket exceeds the device range. Continue V 6209 The remote communication IP address set in the UDP socket function is illegal. Continue V