Chapter 6 Applied Instructions 1. As M1 is on, set the MsgID of the sent message to 1 and MsgID of the received message to 2. Then the data sending begins. A. Sending the data in D10~D15 (6 bytes) to the slave is performed. B. The received response data from the slave are stored in D100~D109. M100 changes to On as the receiving is done. 6_ 2. Master programming example 6-601 Starting device where sent D10 data are stored Starting device where received data are stored D100 for storing MsgID, D101 for storing the number of received packets D102….
for storing received data Communication completion M100 flag Communication error flag M101 Device D10~D15 Content H0A (Defined by users) Device D100 D101 D102~D109 Content 2 8 H0B