Chapter 6 Applied Instructions Explanation 1. See the operand name, use explanation and data type in the following table. 6-723 Operand Name Explanation Data type Remark Server Email server Server +0: Data length, unit: bytes (0 or 4; 0: no modification) Server +1~ Server +2: data (Data are placed from the lower 8 bits.) For example: 192.168.0.1, D0 = 16#0004, D1= 16#0001, D2= 16#C0A8; WORD[N] Refer to Server +0 for address occupation. 3 consecutive words at most can be occupied. Up to 15 words can be used in one string; every section in one string can contain 1-3 words, and use a dot “.” to separate each string, for example 192.168.0.1 String Port Communication port Range: 1~65535, 0:
no modification WORD LMail Local email address LMail +0: data length, unit: bytes (range: 0~63, 0: no modification.) LMail +1~ LMail +32: data (Data are placed from the lower 8 bits.) For example: ex@deltaww.com D0 = 16#000E, D1 = 16#7865, D2 = 16#6440, D3 = 16#6C65, D4 = 16#6174, D5 = 16#7777, D6 = 16#2E63, D7 = 16#6D6F WORD[N] Refer to LMail +0 for address occupation. 33 consecutive words at most can be occupied. Up to 63 words can be used in one string String Sub Email subject Sub +0: data length, unit: bytes (range: 0~31, 0: no modification.) Sub +1~ Sub +16: data content (Data are placed from the lower 8 bits.) For example:
Sub 0 = 16#0003, D1 = 16#7553, D2 = 16#0062 WORD[N] Refer to Sub +0 for address occupation. 17 consecutive words at most can be occupied. Up to 31 words can be used in one string String Verify Enable/ disable verification 0: no modification, 1: Disable verification, 2: Enable verification WORD 6 6 _