Delta DVP-ES3 — 6.23.2 Explanation of Memory Card / File Register Instructions

DVP-ES3 Series Programming Manual 4. If the format of the target file into which the instruction writes data is 0, the format of the file from which the instruction reads data must also be 0. Otherwise, the instruction cannot read the data, and SM453 is ON. The same applies to the other file formats. Example SM450 is ON when the memory card is inserted into the CPU module; SM452 is ON when the MREAD instruction executes; SM452 is OFF when the MREAD instruction completes. _6 Additional remarks 6-738 Error code Description 16#0064 The data cannot be read from the memory card. Operand Setting value Description D0 16#0011 The file from which the data is read The file format:

The values are separated by a comma. The unit of the value is a word. The file name extension is .csv. Use ASCII codes. D300 D300=16#6554 D301=16#7473 D302=16#0031 The file name is “Test1”. D10, D11 16#00000000 The values in the file starting from the first value are read. D1 16#000A Ten values are read from every line. D30, D31 16#00000020 The size of the data that is read from the file is 32 words. D20 - The data that is read is stored in D20.